Related Manuals for JVC LT-32DE9BJ
Summary of Contents for JVC LT-32DE9BJ
- Page 1 LT-32DE9BJ LT-26DE9BJ LCD FLAT TV LCD FLAT TV INSTRUCTIONS INSTRUCTIONS Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996) Number : 5229: LT-32DE9BJ 5230: LT-26DE9BJ...
- Page 2 Dear Customer, This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety. European representative of Victor Company of Japan, Limited is: JVC Technical Services Europe GmbH Postfach 10 05 04 61145 Friedberg Germany...
- Page 3 TV. copyright ( © 2008 Victor company of Japan, Limited) Not to be copied, used or translated in part or whole without JVC’s prior consent in writing except approval of ownership of copyright and copyright law.
- Page 4 notice Freeview Playback explained: Your TV is now compatible with Freeview Playback Group requirements. • Accurate recording by auto tracking The start and end times of scheduled recordings will track the signal, meaning the recording will start and stop at the times sent by the broadcasters.
- Page 5 geneRAL SAFety PRecAutionS Power ● Plug the power cord into the correct power outlet. An unstable connection may cause fire. ● Do not use damaged power cords or plugs, or use a loose wall outlet. This may cause electrical shock or fire. ● Do never touch the power cord with wet hands. This may cause electrical shock. ● Do not use multiple devices with one outlet. Overheating the outlet may cause fire. ● Do not bend or pull out the power cord using force, nor place heavy objects over it. This may cause electrical shock or fire. ● Make sure you pull out the power cord holding the plug itself. An internal disconnection may cause fire. ● When removing the product, turn off the power and pull out the plug from the power outlet. Also make sure other devices including the antenna or the connectors are removed from the outlets before relocating the product. Otherwise you may suffer electrical shock or fire due to a damaged power cord. ● The mains plug shall remain readily operable. ● Plug as disconnection device shall remain to be readily approached by user.
- Page 6 geneRAL SAFety PRecAutionS usage ● Unplug the product from the wall outlet and do not touch the antenna during a thunderstorm. This will prevent damage to the unit due to lightning and power-surges. ● Keep dust or water away from the pins or touching points of the power plug. This will prevent electrical shock or fire. ● Keep children from climbing over the product. The device may cause serious injury or death if it falls on them. ● Do not place anything over the product that children may try to reach. The device may cause serious injury or death if it falls on them. ● When removing the battery from the product, keep it out of children’s reach. If a child swallows a battery, consult a doctor immediately. ● Use only specified batteries and do not use an old battery along with a new one. Align the batteries according to the correct polarity (+ or -).
-
Page 7: Table Of Contents
tAbLe oF contentS PRePeRAtion AnALog cHAnneL SettingS (in Analog tV mode only) Front and Side Panel - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -7 Automatic Search - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Rear and Side Panel - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -9 Manual Search - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -... -
Page 8: Preperation
PRePeRAtion Front and Side Panel Here the shown illustration is LT-32DE9BJ model and may be somewhat different from your TV. Changes input source. Displays menu / confirms selection. Changes channel / moves selection. Adjusts volume / moves selection. Power On/Off Power lamp ON: Lit (Blue) / STANDBY: Unlit / REC: Lit (Red) Remote control sensor Accessories Please check that the following accessories are included with your TV. - Page 9 PRePeRAtion When attaching the tV to the wall, use the optional JVc wall mounting unit (only for Lt-32De9bJ) • Consult a qualified technician. • See the included manual on mounting procedures. • JVC assumes no responsibility for damage due to improper mounting.
-
Page 10: Rear And Side Panel
PRePeRAtion Rear and Side Panel Here the shown illustration is ci (common interface) SLot LT-DE9BJ model and may be A slot for a CAM (Conditional Access Module). somewhat different from your TV. Ac inPut Connects the power cord. HDMi inPut Connect to the HDMI outputs of DVD or STB. ScARt inPut/outPut Connect to the SCART input/output of VCR, DVD or STB. -
Page 11: Remote Control Buttons
PRePeRAtion Remote control buttons (Power on/off) Switches between operation and standby modes. Changes input sources. (Mute) Mutes the sound. no function button tV/DtV Switches between digital TV and analog TV modes. Pic MoDe Selects the picture mode. (DuAL SounD) Selects the sound mode (Stereo, Mono, etc.) in Analog TV input or the soundtrack list in Digital TV input. - Page 12 PRePeRAtion Playback control buttons (only in Digital tV input) RePLAy Jumps back 7 seconds (default value) booKMARK ADD and starts playing again in trick play Sares the current viewing position as mode. a bookmark. SKiP booKMARK JuMP Skips watching the programme for 0 Displays the list of saved viewing seconds (default value) forward.
-
Page 13: Connecting The Antenna
PRePeRAtion connecting the Antenna Connect the RF coaxial cable from an aerial or a cable TV to the RF jack on the rear of the TV. note ▪ For proper reception of signals, an external antenna is required. For best reception, an outdoor antenna is recommended. ▪... -
Page 14: Connecting External Devices
connecting eXteRnAL DeViceS connecting the DVD or Set-top box Here the shown illustration is LT-DE9BJ model and may be somewhat different from your TV. HDMi ScARt coMPonent With a ScARt cable Connect the SCART cable between the SCART connector (eXt-1 or eXt-2) on TV and the SCART connector of DVD or STB. -
Page 15: Connecting The Vcr
connecting eXteRnAL DeViceS connecting the VcR With a ScARt cable Connect the SCART cable between the SCART connector (eXt-1 or eXt-2) on TV and the SCART connector of VCR. With a composite cable Connect the composite video and audio cable between the composite video and audio input connectors (eXt-4) on TV and the composite video and audio output connectors of VCR. -
Page 16: Connecting Headphones
connecting eXteRnAL DeViceS connecting the Digital Audio System (in Digital tV Mode only) DigitAL AuDio out (oPticAL) Connect the optical cable between the DigitAL AuDio out (oPticAL) on TV and the composite optical audio input connector of digital audio system. Here the shown illustration is LT-DE9BJ model and may be somewhat different from your TV. -
Page 17: Installation Wizard
inStALLAtion WiZARD Wizard for Digital channels (in Digital tV Mode only) The installation wizard for digital channels will appear automatically when you perform the followings; ● Turning on your TV for the first time after purchase. (Refer to p.18) ● Performing the default setting in DtV Setup > installation menu when Digital TV mode. (Refer to p.0) note: ▪... - Page 18 inStALLAtion WiZARD Wizard for Analog channels (APS) (in Analog tV Mode only) Firstly, switch to Analog tV input mode using the AV or tV/DtV button. When you perform the default setting in Feature menu, the installation wizard for analog channels will appear automatically. (Refer to p.8) note: The default PIN code is 0000. If you have forgotten the PIN code, please contact your local TV distributor. Shows the main language and country.
-
Page 19: Basic Operation
bASic oPeRAtion turning on the tV Firstly, connect the power cord correctly. At this stage, the TV switches to standby mode. In standby mode to turn TV on, press the PoWeR, tV/AV or P / button on the TV or press the PoWeR, AV, tV/DtV, P / or nuMbeR button on the remote control and the TV will switch on. -
Page 20: Displaying Information
bASic oPeRAtion Displaying information Programme information (i- plate) (in Digital tV Mode only) Programme information is displayed for a certain period of time whenever you switch channels. You can view the programme information by pressing the button while watching a programme. -
Page 21: Displaying Channel List
bASic oPeRAtion Simple information (except for Digital tV Mode) You can view the information such as the channel number (or input source), and sound mode (or source resolution) by pressing the button while watching an analog TV channel or external input source. 11 ----- 1 ----- P 11 -----... - Page 22 bASic oPeRAtion Digital Programme Features (in Digital tV Mode only) Subtitle If the programme provides subtitle information you can select the language for the subtitle. Press the SubtitLe button to display the subtitle language list. Subtitle Select a subtitle language using the ▲/▼ button and press the oK English button. note: You can select the default subtitle language in DtV Setup > configuration >...
-
Page 23: Selecting The Main Input Source
bASic oPeRAtion Selecting the Main input Source Once you have connected your various audio and video systems, you can view different sources by selecting input sources. Press the AV button. Select a main input among the sources and press the oK button. note: You can easily switch to digital TV from different sources by pressing the tV/DtV button. Setting the Aspect Ratio You can select an aspect ratio mode by pressing the ZooM button repeatedly on the remote control. -
Page 24: Displaying Teletext Information
bASic oPeRAtion Displaying teletext information You can display teletext information at any time on your TV. Most TV broadcasting stations provide text information services via teletext. The index page of the teletext service gives you information on how to use the service. note: To properly display teletext information, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed. -
Page 25: Programme Guide (In Digital Tv Mode Only)
PRogRAMMe guiDe (in DigitAL tV MoDe onLy) The Programme Guide displays the programme information about each digital channel, based on the date and time. You can also schedule your recording using the information given. Press the guiDe button to display the programme guide. note: Press the guiDe button again to exit the guide screen. -
Page 26: Moving The Time Bar
PRogRAMMe guiDe (in DigitAL tV MoDe onLy) Moving the time bar You can quickly search the time zone using the time bar. Press the gReen button to display time control bar. Select each button and press the oK button to move the time bar. If you press a button repeatedly, the same operation is repeated. -
Page 27: Finding A Programme
PRogRAMMe guiDe (in DigitAL tV MoDe onLy) Schedule Press the yeLLoW button to display the schedule list. The schedule screen displays the reserved programme list and lets you add, edit or delete the reservations. note: ▪ For more information about how to add, edit or delete a reservation, refer to Recording Schedule (p.9). -
Page 28: Menu Settings
Menu SettingS You can customize your TV which best fits your requirements using the various TV menus. How to navigate the Menu button Action Menu Displays the menu. > P i c t u r e ▲/▼ Moves among menus or items. Mode Standard oK or ►... -
Page 29: Feature Settings
Menu SettingS installation Settings (in Analog tV Mode only) > installation ● country: Shows the country. > i n s t a l l a t i o n Countr y ● Antenna Power: Off - On Antenna Power O ff If you connect an active antenna to the TV, you have to set the Auto Search Antenna Power to on to supply the 5V power into antenna. - Page 30 Menu SettingS time Setting Select Feature > time Setting. > > t i m e S e t t i n g ● Date: Shows the current date. Date 19.03.2007 Local Time 10 : 00 ● Local time: Shows the current time. Power On Time -- : -- ● Power on time: Select On to set time for turning on the power and Power O ff Time then enter hour/minute. At the preset time, the TV will automatically...
- Page 31 Menu SettingS DtV Setup (in Digital tV Mode only) > DtV Setup ● Record : (Refer to p.35) > D t V S e t u p DT V Setup ● configuration: (Refer to p.45) ● edit channels: (Refer to p.34) ● installation: - Auto Search / Manual Search: (Refer to p.33) - Software update: (Refer to p.47) - Default Setting: (for Digital TV Mode Only) Move Enter...
-
Page 32: Analog Channel Settings (In Analog Tv Mode Only)
AnALog cHAnneL SettingS (in AnALog tV MoDe onLy) Analog channels can be searched and edited only in Analog TV input mode. note: You can access this menu only in Analog TV input mode. > i n s t a l l a t i o n How to navigate the Menu Countr y Antenna Power... -
Page 33: Manual Search
AnALog cHAnneL Setting (in AnALog tV MoDe onLy) Manual Search Select Manual Search. > > M a n u a l S e a r c h ● colour System: Auto - PAL - SECAM Colour System Auto Audio System ● Audio System: BG – I – DK - L Band Channel ● band: C (Air Channel) - S (Cable Channel) Programme No ● channel: Choose or enter the channel number. - Page 34 DigitAL cHAnneL SettingS (in DigitAL tV MoDe onLy) Digital channels can be searched and edited only in Digital TV input mode. note: You can access this menu only in Digital TV input mode. How to navigate the Menu Installation Country United Kingdom Auto Search button...
- Page 35 DigitAL cHAnneL SettingS (in DigitAL tV MoDe onLy) Manual Search Select Manual Search. ● channel: Select a channel to search. Manual Search ● Frequency: Enter the frequency. Channel Frequency 50500 ● network Search: Enable - Disable Network Search Disable Select Search to start searching channels. Please wait until the channel search is complete. Search Manual search is similar to that of the Auto search.
-
Page 36: Recording And Playback (In Digital Tv Mode Only)
RecoRDing AnD PLAybAcK (in DigitAL tV MoDe onLy) This chapter describes the PVR (Personal Video Recorder) function that allows you to record a programme in the connected hard disk drive. Using the built-in hard disk drive, you can record a programme without an external media device such as a VCR. -
Page 37: Playback Control Buttons
RecoRDing AnD PLAybAcK (in DigitAL tV MoDe onLy) Playback control buttons Pause If you press the PAuSe ( )button on the remote control, the current programme is paused. If you press the PAuSe ( ) button once again, the programme is resumed from that point.. note: Pause makes the time gap or delay between the broadcasting (live) point and watching point. - Page 38 RecoRDing AnD PLAybAcK (in DigitAL tV MoDe onLy) Direct Jump If you press the ◄/► button during playing, a white moving indicator will appear in the progress bar. Move this indicator to a desired time point using the ◄/► button and then press the oK button to play the programme from the specified time point. You can also move to the specified time point directly by entering the time (hh:mm) you want using the nuMbeR button while playing back a recorded programme. Repeat Mode You can select a specific block within a recorded programme and play it back repeatedly. Press the A-b button to set the first repeating position. Select the second position using the ◄/► button and press the oK button.
-
Page 39: Instant Recording
RecoRDing AnD PLAybAcK (in DigitAL tV MoDe onLy) instant Recording Press the RecoRD ( ) button to record the current programme instantly. You can record up to two channels simultaneously. While recording two channels simultaneously, you can perform TSR(Time Shifted Recording) and view the programmes on air. Press the StoP ( ) button to stop the recording. If you stop while recording two other channels, you will be prompted to select one among the recording channels. -
Page 40: Recording Schedule
RecoRDing AnD PLAybAcK (in DigitAL tV MoDe onLy) Recording Schedule Record You can set a programme to record automatically. Recorded Programme Recording Schedule Select DtV Setup > Record > Recording Schedule menu. HDD Control Recording’s Start Time On Time ● Select: Select/Unselect the reserved programme using the gReen Recording’s End Time On Time button. -
Page 41: Programme Playback In The Play List
RecoRDing AnD PLAybAcK (in DigitAL tV MoDe onLy) Programme Playback in the Play List You can easily view the recorded programme list by pressing the PLAyLiSt button. You can switch among ViDeo (tV), AuDio (radio) and Selected Files list using ◄/► button. ViDeo/AuDio List Select ViDeo/AuDio list using the ◄/► button. -
Page 42: Chase Play
RecoRDing AnD PLAybAcK (in DigitAL tV MoDe onLy) Play bar If you press the playback control buttons while watching the recorded programme, the Play bar appears on the bottom of the screen. Operation status Elapsed time (hh:mm:ss) Watching point The amount of saved programme (Total size) Total time (hh:mm:ss) note: When the operation status is PLAYING on the Play bar, if you take no action for about 10 seconds, the Play bar will be disappear. -
Page 43: Editing Recorded Programmes
RecoRDing AnD PLAybAcK (in DigitAL tV MoDe onLy) editing Recorded Programmes Select DtV Setup > Record > Recorded Programme menu. ● Select: Select/Unselect the recorded programme using the gReen button. You can select multiple programmes. Record ● Delete: Delete the selected programme using the ReD button. Recorded Programme Recording Schedule ● edit: Trim the selected programme or change the attribute of that HDD Control using the yeLLoW button. - Page 44 RecoRDing AnD PLAybAcK (in DigitAL tV MoDe onLy) trimming the Recorded Programme Select a programme and press the yeLLoW button. A pop-up will appear. Select trim and press the oK button. Recorded Programme You can trim the recorded programme using the following functions. Edit note: ▪...
-
Page 45: Hdd Control
RecoRDing AnD PLAybAcK (in DigitAL tV MoDe onLy) changing the Attribute Select a programme and press the yeLLoW button to change the attribute of the recorded programme. A pop-up will appear. Select File and press the oK button. Recorded Programme ● Programme: Change the programme name using the File keyboard. -
Page 46: Dtv Configuration (In Digital Tv Mode Only)
DtV conFiguRAtion (in DigitAL tV MoDe onLy) This chapter describes how to set up the configuration for digital channels. Configuration note: You can access this menu only in Digital TV input mode. Parental Control Language Setting How to navigate the Menu Time Setting Miscellaneous Settings button... -
Page 47: Time Setting
DtV conFiguLAtion (in DigitAL tV MoDe onLy) time Setting Time Setting Select DtV Setup > configuration > time Setting. GMT Offset GMT+0100 ● gMt offset: Set the GMT offset for current time. note: ▪ The current time is set automatically whenever GMT offset changes. ▪ When gMt offset is set to Auto, you have to tune the terrestrial channel for a certain period of time to set the time automatically. -
Page 48: Dtv Software Update (In Digital Tv Mode Only)
DtV SoFtWARe uPDAte (in DigitAL tV MoDe onLy) In order to maintain proper performance of the TV, it is essential to have the most up-to-date software. Installation note: You can access this menu only in Digital TV input mode. Country United Kingdom Auto Search How to navigate the Menu... -
Page 49: Regular Auto Update And Search Time
DtV SoFtWARe uPDAte (in DigitAL tV MoDe onLy) Regular Auto update and Search time Your TV can start the Regular Auto Update in the standby mode. Software Update Select Regular Auto update and select enable or Disable. Automatic Update Manual Update When you select enable, enter the searching time in Search Regular Auto Update Enable... -
Page 50: Appendix
APPenDiX Menu Map Picture Mode p.7 Brightness Contrast Sharpness Colour Hue ------------------------------- (NTSC signal only) Fleshtone Colour Temperature Noise Reduction Backlight Sound Bass p.7 Treble Balance Hyper Sound Installation Country p.8 (In Analog TV Mode Only) Antenna Power p.8 Auto Search p. Manual Search p. Edit Channels p. Feature... -
Page 51: Troubleshooting
APPenDiX troubleshooting Before contacting your local service dealer, please make sure you refer to the following guide. If the TV does not work normally after completing the following trouble shooting, please contact your local TV distributor or service centre. () No message is displayed or the TV has no power. Check the main power cable and make sure it is plugged into a suitable power outlet. - Page 52 APPenDiX (0) Cannot update new software. You can get an update. If the TV does not show a message requesting update, that means no software is available. () Cannot watch pay channels. Check in the menu that you have a valid and working subscription to the channels you wish to view. Contact your network operator for more information.
-
Page 53: Error Message
APPenDiX error Message Error message Possible causes What to do The aerial is not pointing properly. Adjust aerial. Check the cable from the aerial. If you cannot resolve the no or bad Signal problem, you may need to have your aerial and installation tested by a professional. -
Page 54: Specifications
APPenDiX Specifications Model Lt-26De9bJ Lt-32De9bJ Broadcasting systems CCIR B/G/I/D/K/L PAL, B/G, D/K, I Colour systems SECAM, B/G, D/K, L Digital : 474 MHz ~ 858 MHz Channel and frequencies Analogue : 45.25 MHz ~ 855.25 MHz Cable TV (S1-S20/S21-S41) Sound-multiplex systems A2 / Nicam Stereo Teletext systems FLOF (Fastext), TOP Power requirements AC 220 V - 240 V, 50/60 Hz Audio output 5W + 5W 10W + 10W (Rated power output) Speaker size (H x W x D: mm) (5 x 5 x .) oval x (40 x 00 x 45.) oval x ... - Page 56 For users in the UK : If you have any problems setting up your new TV, please call the Helpline on 0870 330 5000. For users in the Republic of Ireland : If you have any problems setting up your new TV, please call the Helpline on 1890-582500.