JVC LT-32DP9BU Instructions Manual page 14

Initial settings
The initial settings will begin automatically when the TV is turned on for the
very first time. Follow the on-screen instructions to perform the settings.

Turn on
The power lamp on the TV lights
If the remote control doesn't work, confirm that the mode is set to

"TV".

Select a Menu language
Select a language for on-screen displays.
Menu Language
Step 1: Please select Language 1/3
English
Deutsch
Français
Italiano
Castellano
Català
Nederlands
Dansk
Svenska
Norsk
If the "Menu Language" does not appear, refer to "Factory Setting"

(P. 34) or "Retuning" (P. 34) for channel settings.

Select a country *
Select the country of installation. Receivable digital channels will differ
depending on the "Country" setting.
Country
Step 2: Please select Country 1/2
Austria
Switzerland
Czech Republic
Germany
Denmark
Spain
Finland
France
United Kingdom
Italy
ENGLISH
1 select
2 set
1 select
2 set
Getting started

Select a system language
Select a language for audio, subtitle, and EPG.
The system language will differ depending on selected country.

System Language
Step 3: Please select Language
German

Select place of installation
Select "Home", for use at home.
Place of Installation
Step 4: Please select Place of Installation
Home
Shop with Auto Demo.

Set antenna power
Confirm that the aerial power supply is set to "Off". Select "On" only
when using an aerial which requires external power. (P. 12)
Antenna Power
Step 5: Please select Antenna Power
On
Off
Note
* To select a country that not listed, refer to (P. 1).
Basics Advanced
1 select
2 set
1 select
2 set
1 select
2 set
Etc.