To select a page of Teletext ....33 Contents To Select Index Page ......33 Searching for a teletext page while Safety Precautions ........2 watching TV ......... 33 To Select Double Height Text ....34 Preparation ..........2 To Reveal “concealed” Information ..34 Important Instruction .......
5. Ventilation Safety Precautions The slots and openings on the TV set are in- Preparation tended for ventilation and to ensure reliable operation. To prevent overheating, these open- Use this device in moderate climates. ings must not be blocked or covered in any- Please read the following recommended way.
This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety. European representative of Victor Company of Japan, Limited is: JVC Technology Centre Europe GmbH Postfach 10 05 52 61145 Friedberg Germany - 3 -...
Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply. GREEN MAINS (AC) OPERATION & FUSE YELLOW The wires in this mains lead are coloured in (Earth) accordance with the following code : BLUE-NEUTRAL BROWN-LIVE As the colours of the wires in the mains lead...
Attention: (Business users) This symbol is only If you wish to dispose of this product, please visit our web page www.jvc-europe.com to valid in the European obtain information about the take-back of the product. Union. [Other Countries outside the European Union]...
Where to install WARNING • Only use a VESA 200x400 compatible mounting unit(optional) when installing this TV on the wall. • Make sure the TV is installed on the wall by a skilled installer. Locate the TV away from direct sunlight and strong lights, soft, indirect lighting is recommended for comfortable viewing.
Important Information Please take note EXCLUSION CLAUSE JVC shall under no circumstances be liable for loss and/or damage to the product caused • fire; • earthquake; • accidental damage; • intentional misuse of the product; • use of the product in improper conditions;...
LCD TV and Control Buttons FRONT VIEW Power Lamp Remote Control Sensor REAR VIEW TV / AV TV/AV MENU/OK MENU/OK PROGRAMME UP PROGRAMME DOWN SIDE VIEW VOLUME UP VOLUME DOWN POWER SWITCH Note: If the power lamp is unlit, press the power switch. - 10 -...
Features • Remote controlled colour television. • DTV(Digital terrestrial broadcasting (DBV-T)) • 100 programmes from VHF, UHF bands or cable channels can be preset. • It can tune cable channels. • Connecting HDMI Devices is available. • Controlling the TV is very easy by its menu driven system. •...
Getting Started Follow Step 1 to 7 to set up your TV: Step 1: Checking the accessories supplied • Remote control unit x 1 • AA/R6 battery x 2 Step 2: Inserting batteries • Remove the battery cover located on the back of the remote control by gently pulling upwards from the indicated part.
Initial Settings If the TV will not be turned on, press the standby button on the remote control. When the TV is first turned on, it goes into the initial settings mode. Follow the instructions on the screen display to make the initial set- tings.
63.75 MHz P 03 - C 04 To use T-V LINK functions A “T-V LINK compatible VCR” means a JVC Cancel video cassette recorder with the T-V LINK logo, or with one of the following logos. For details see your VCR instruction manual.
“SMARTLINK” (A trademark of Sony Corpora- When you press the following buttons ( / I, tion) , TV / DTV, , AV, MENU, (SUBTITLE), Only VCR equipments are corresponded with GUIDE, BACK, , number buttons) "T-V LINK". during recording, a message appears ask- ing if you want to stop recording or not.
• If you turn the power switch off when the TV is Operation with Remote Control on, you can switch on the TV again by press- The remote control of your TV is designed to ing the power switch. control all the functions of the model you se- Turning the TV Off lected.
along with its channel list number and an in- Operating while watching dication of the strength of the signal received on this tuning channel. Pressing the TV/DTV button at any time while The name and the start and finish time of the watching television programmes will switch programme currently showing on the selected the TV set between displaying the digital ter-...
event is active at that time. Current date and time • You can not set the reminder for the Channel listings programme which has already started. Selected date and time • “No Information” is displayed for the ...
• With DTV, in addition to digital teletext broad- • Before using DTV timer recording, the VCR casting at the same time as normal broad- and TV must be connected correctly. For de- casting, there are also channels with just digi- tails, see T-V LINK section.
Page 22
timer number, and then press the OK but- Mode: ton. Use the “ ” / “ ” buttons to choose the timer The timer setting window appears. mode (Once/Daily/Weekly), and then press the OK button. 4. Prepare your VCR for recording THREE When recording on a T-V LINK compatible VCR:...
the recording start time is reached, it means Configuration Menu VCR is not receiving the Direct Rec com- Set the basic setting when watching DTV. mand from the TV. In this case, follow the instructions of “When recording on a T-V LINK Choose configuration and press the OK but- incompatible VCR:”.
Page 24
"Dolby" and the double-D symbol are trade- marks of Dolby Laboratories. CONFIGURATION Audio Language English Subtitle Dolby Digital Subtitle English With DTV, a number of subtitles can be broad- Favourite Mode cast at the same time. Choose the subtitle V.0.14 Software Version you want to display when watching these Enter PIN code...
When you are making this setting for the • When the (information) button is pressed, first time, input 0000. the help screen appears. When it is pressed When a PIN code has already been set, en- again, the previous screen is returned to. ter the correct PIN code.
2. Press the “ ” / “ ” buttons and choose character, press the “ ” / “ ” buttons to the channel to be registered as a favourite move the cursor and edit the name, and channel, and then press the OK button. then press the OK button.
Page 27
on the two bar graphs at the bottom. When OK Search with the “ ” or “ ” buttons and press is pressed, the TV searches that frequency OK. A warning message is displayed. and display a list of the channels found. Start automatic search? Current PR list will be replaced.
• Refer to the module instruction manual for PR List Empty. Start automatic search details of the settings. Analogue TV Menu System Your TV has been designed with a menu sys- tem to provide easy manipulation of a multi- • Press the OK button to start the automatic function system.
Colour Temp Balance • By pressing button select Colour Temp. Select Balance by pressing buttons. Press button to change the level of the • Press to choose from one of these Balance. options: Cool, Normal and Warm. Sound Mode Noise Reduction By pressing...
You can set the TV to automatically change to 4, EXT-5 Audio, EXT-6 Audio, or Monitor. a blue screen if the signal is weak or absent, LT-32DY8ZJ TV/DTV: or when there is no input from an external de- ·You can output the last channel you watched.
Page 31
Program Table Delete: To delete a programme, press the YELLOW By pressing button, select Program button. Pressing the YELLOW button again Table. Press to display Program Table. erases the selected programme from the programme list, and the programmes below Program Table shift one up.
Page 32
Whenever you press the BLUE button, A.P.S. VCR (Video Cassette Recorder) function stops and Program Table appears If you want to watch a VCR source, then it will on the screen. be better to set VCR mode On. For this, while If you wait until the end of A.P.S., Program Table ...
To cancel mute, there are two alternatives; the Source menu first one is pressing the button and the By pressing button, select the sixth icon. second one is increasing/decreasing the vol- Source menu appears on the screen. ume level. Freeze Picture You can freeze the picture on the screen by SOURCE pressing the OK button.
The top and bottom of the picture are slightly Analogue Teletext cut off. Teletext is an information system that displays 14:9 Zoom text on your TV screen. Using the Teletext in- formation system you can view a page of in- This zooms up the wide picture (14:9 aspect formation on a subject that is available in the ratio) to the upper and lower limits of the...
To Select Double Height Text To exit Teletext • Press “ ” button for the top half of the infor- • Press “ ” button. The screen will switch to mation page to be displayed in double height TV mode. text.
to receive. This organisation will supply you a Connect Peripheral corresponding decoder unit to allow the prog- Equipment rammes to be unscrambled. There is a wide range of audio and video equip- For further information ask your dealer. See ment that can be connected to your TV. also the booklet supplied with your decoder.
• Replace the aerial cable in the aerial socket improve the picture quality by changing the of your video recorder once you have stored direction of the aerial. the test signal. Is the picture or Teletext unrecognisable? Check if you have entered the correct frequency. Camera And Camcorder The picture quality may degrade when two peripherals are connected to the TV at the...
Antenna Connections Outdoor Antenna Connections VHF antenna Round 75 ohm coaxial cable Rear of TV Flat 300-ohm twin lead cable VHF/UHF antenna Rear of TV Round 75-ohm coaxial cable Peripheral Equipment Connections HEADPHONE AUDIO AUDIO IN VIDEO IN VIDEO ANT .IN CAMCORDER FOR SATELLITE RECEIVER DECODER...