Canon Color imageCLASS MF8350Cdn Starter Manual page 28

Others
WARNING
• If you are using a cardiac pacemaker
This machine generates a low level magnetic field. If you use a cardiac pacemaker
and feel abnormalities, please move away from this machine and consult your
physician immediately.
Telephone Equipment
When using telephone equipment, basic safety precautions should always be
followed to reduce the risk of fire, electric shock, and injury to persons, including the
following:
. Do not use this machine near water (i.e., near a bathtub, kitchen sink, or laundry
tub), or in a wet basement or near a swimming pool.
2. Avoid using the telephone during an electrical storm, as there may be a remote
risk of electric shock from lightning.
3. Do not use the telephone to report a gas leak in the vicinity of the leak.
Installation Requirements and Handling
In order to use this machine in a safe and trouble-free manner, install the machine in
a place that fulfills the following conditions. Also, read the remarks carefully.
Temperature and Humidity Conditions
• Temperature range: 0 to 30°C (50 to 86°F)
• Humidity range: 20 to 80 % RH (no condensation)
IMPORTANT
Protecting the machine from condensation
• To prevent condensation from forming inside the machine in the following cases,
let the machine adjust to the ambient temperature and humidity for at least two
hours before use.
- When the room where the machine is installed is heated rapidly
- When the machine is moved from a cool or dry location to a hot or humid
location
• If water droplets (condensation) form inside the machine, this can result in paper
jams or poor print quality.
When using an ultrasonic humidifier
When you are using an ultrasonic humidifier, it is therefore recommended that you
use purified water or other water that is free of impurities.
If you use tap water or well water, impurities in the water will be dispersed through
the air. This can be trapped inside the machine, causing degradation in print quality.
Power Supply Requirements
20 to 27 V 60 Hz
IMPORTANT
Precautions when connecting the power cord
• Do not connect this machine to an uninterruptible power source.
• Use an AC power outlet exclusively for the machine. Do not use the other sockets
of the AC power outlet.
• Do not plug the power plug into the auxiliary outlet on a computer.
Do not use the same AC power outlet for both the machine and any of the
following equipment.
- Copy machine
- Air conditioner
- Shredder
- Equipment that consumes a large amount of electricity
- Equipment that generates electrical noise
• When unplugging the power cord, keep interval of 5 seconds or more before
plugging it again.
Miscellaneous precautions
• The maximum power consumption of the machine is ,200 W.
• Electrical noise or a dramatic drop in mains voltage may cause the machine or
computer to operate incorrectly or lose data.
20
Installation Requirements
• A location with sufficient space
• A location with good ventilation
• A location with a flat, even surface
• A location able to fully support the weight of the machine
IMPORTANT
Do not install the machine in the following locations, as this may result in
damage to the machine.
• A location subject to dramatic changes in temperature or humidity
• A location subject to condensation
• A poorly ventilated location
(If you use the machine for a long time or to perform a large amount of printing
in a poorly ventilated room, the ozone or other odors generated by the machine
may create an uncomfortable working environment. In addition, chemical
particles are dispersed during printing; therefore, it is important to provide
adequate ventilation.)
• A location near equipment that generates magnetic or electromagnetic waves
• A laboratory or location where chemical reactions occur
• A location exposed to salt air, corrosive gases, or toxic gases
• A location, such as on a carpet or mat, that may warp from the weight of the
machine or where the machine is liable to sink
Installation Space
Required installation space
Front View
1327 (52 1/4)
Paper
Feeder cover
cassette
100 100
(4) (4)
Rear cover
Maintenance and Inspections
IMPORTANT
• Follow the instructions in the caution label attached to this machine.
• Avoid shaking or applying a shock to this machine.
• To prevent the paper jam, do not turn the power ON/OFF, open/close the
operation panel or rear cover, and load/unload paper in the middle of printing
operation.
• Be sure to remove the toner cartridge from the machine when transporting the
machine.
• To avoid exposing the toner cartridge to light, place it in the protective bag
included with this machine or wrap it in a thick cloth.
• Clean this machine regularly. If this machine becomes dusty, it may operate
improperly.
• Use a modular cable of 3 m or shorter in length.
• Depending on your locale or your telephone connection, you may be unable to
perform data communication. In this case, contact your local authorized Canon
dealer or the Canon help line.
• The repairing parts and toner cartridges for the machine will be available
for at least seven (7) years after production of this machine model has been
discontinued.
mm (in.)
Feeder