Basic Operation - Canon Color imageCLASS MF8350Cdn Starter Manual

1 2
Preface Installing the Machine

Basic Operation

Copying
Place documents on the platen glass or load them
in the feeder.
* Up to 50 documents can be loaded in the feeder. The
51st and subsequent documents are not scanned.
Press [ ].
Sending Faxes
Place documents on the platen glass or load them
in the feeder.
Canceling sending fax
Press [ ].
Press [ ] (Stop).
When the <Cancel?> message
appears, select <Yes> with [
then press [OK].
3
Configuring and Connecting the Fax
This section describes the basic procedure. For details, see the
Use numeric keys to enter the desired copy quantity (1 to 99).
If you make a mistake when entering a copy quantity, press [
This section describes the basic procedure. For details, see the
Press [
Placing documents on the platen glass
Select the size of the original document with [
press [OK].
Press [
], and
When all documents are scanned completely, select <Start
Sending>, and then press [OK].
4
Connecting to a Computer and
Installing the Drivers
Press [ ] (Color) or [
Canceling copy jobs
Press [ ] (Stop).
When multiple jobs are being processed,
select the jobs to be canceled with [
[ ], and then press [OK].
When the <Cancel?> message appears,
select <Yes> with [
[OK].
Press [ ].
When specifying the following copy settings, see the
e-Manual.
• Image quality • Density
Specify the destination using the numeric
keys, [ ] (Tone), and [
When specifying the destination using the
following functions, see the
• One-touch keys
• Coded dial
• Group dialing
] (B & W).
] (B & W) for each document.
Appendix
e-Manual.
] (Clear).
] (B & W).
] or
], and then press
e-Manual.
• Sharpness
] (Symbols).
e-Manual.
• Address book
• Sequential broadcast
] or [ ], and then
13