Canon Color imageCLASS MF8350Cdn Starter Manual page 15

1 2
Preface Installing the Machine
2.
S et the fax receive mode.
You can specify how the machine should operate for a fax call or telephone call.
By answering the questions that appear on the display, the machine is set to any one of the following four* operation modes.
<Auto><Fax/Tel><Answer><Manual>
* You can set a receive mode other than the above manually depending on your country or region. For details on the setting procedure, see "Receiving Faxes" in the e-Manual.
Do you want to use
this machine for fax
only (no telephone)?
Yes
No
Do you want to auto-
receive faxes and
answer phone manually?
Yes
No
Do you want to use
an answering machine
to answer the phone?
Yes
No
The <Manual> mode is set.
→ Proceed to Step 3.
• Responds both a telephone call and fax by
picking up the handset.
• Rings when receiving a call or fax.
3
Configuring and Connecting the Fax
•
•
* If connecting with the telephone in the auto receive mode, the
telephone rings when receiving a fax or telephone call. You can answer
the telephone while the telephone is ringing. To configure so that the
telephone does not ring, see "Incoming Ring" in the
•
•
* An incoming call rings. To configure so that the incoming call does not
ring, see "Incoming Ring" in the
•
•
•
4
Connecting to a Computer and
Installing the Drivers
The <Auto> mode is set.
→ Proceed to Step 3.
Receives a fax automatically.
Does not use the telephone.*
The <Fax/Tel> mode is set.
→ Proceed to Step 3.
Receives a fax automatically.*
Responds a telephone call by picking up the handset.
The <Answer> mode is set.
→ Proceed to Step 3.
Receives a fax automatically.
Responds a telephone call by built-in answering
machine.
Rings when receiving a call or fax.
Appendix
e-Manual.
e-Manual.
7