Configuring The High-Availability Interface - HP StorageWorks SR2122 User Manual

Configuring System Parameters
1. enable — Enter Administrator mode.
2. admin contactinfo name "PatJ. Smith" email
Note:
or all four parameters.

Configuring the High-Availability Interface

When the storage router is part of a storage router cluster, you will need to
configure the high availability (HA) interface. To configure the HA interface
parameters:
1. enable — Enter Administrator mode.
2. interface ha ip-address 10.1.20.56/24 — Specify or change
See
about configuring the SR2122-2 in a high availability cluster.
106
pjsmith@mystoragenet.com phone "763 555-117" pager
"763 555-7766" — Provide contact name, email address, phone number,
and pager number. Enclose each string that contain spaces in single or double
quotes.
The admin contactinfo command requires that you specify either one parameter
the IP address and subnet mask for the HA interface
Chapter 11, "Configuring a High Availability Cluster" for more information
IP Storage Router SR2122-2 User Guide