Using Tftp; Downloading Updated Software - HP StorageWorks SR2122 User Manual

Maintaining and Managing the Storage Router
4. software proxy address http://10.1.10.126 port 32 —
5. software proxy username HPuser password HPpswd — Use
Note:
password must be the same as your hp.com login ID and password.

Using TFTP

To specify the TFTP download location:
1. enable — Enter Administrator mode.
2. show software version all — List the software versions currently
3. software tftp hostname TFTPHost1 directory /tftpboot

Downloading Updated Software

The download software command makes a new version of software
available to the storage router for boot purposes. You can store two versions of
software on the storage router. Before attempting to download updated software,
verify that only a single version of software exists on the storage router.
170
This is the address and port number of the proxy server that will be used to
access the URL specified in Step 3 (for example, http://10.1.10.126, port
32). (Optional)
this command to define the user name and password needed to access the
selected download location. For example, specify user name HPuser and
password HPpswd. If no user name and password are required, use the
keyword none (for example, software proxy username none).
(Optional)
If you are using the default URL, http://www.hp.com, the username and
available for booting, along with the current download locations. Verify that
the version of software required is not already available. Verify that the
current download location information for TFTP is correct.
— If the current host name and base directory location are not the ones from
which you would normally retrieve updated software, reset the host and
optional base directory. For example, set the host name to TFTPHost1 and the
base directory to /tftpboot. If a DNS is not defined for the storage router,
enter the IP address of the TFTP host.
IP Storage Router SR2122-2 User Guide