Verifying And Saving Configuration - HP StorageWorks SR2122 User Manual

Verifying and Saving Configuration

Verify the system parameters using the following procedure. You can save the
configuration at any time using either the save system bootconfig or
save all bootconfig commands. You must save the running configuration
to the bootable configuration for it to be retained in the storage router when it is
rebooted.
To verify configuration information.
1. show system — Display system information, such as system name,
2. show ip route — (Optional) Display the system route table, if you
3. show ip rip — (Optional) Display RIP configuration and operational
4. show snmp — (Optional) Display SNMP management configuration
5. show admin — (Optional) Display contact information for the system
6. show ssh — (Optional) Display SSH operational status, if configured.
7. show ssh fingerprint — (Optional) Display public key information
8. show restrict — (Optional) Display the restrict settings, if you make
9. show isns — (Optional) Display iSNS configuration information.
10. show bootconfig — (Optional) Display the current boot configuration of
11. show runningconfig — (Optional) Display the current running
IP Storage Router SR2122-2 User Guide
software version, date and time (including time zone), NTP server, DNS
(name server), and management and HA interface IP addresses.
added any routing information, or if you enabled the storage router for RIP
listening.
information, if set.
information for the storage router, if set.
administrator of the storage router, if set.
for the ssh, if set.
changes to the protocols allowed for the various SR2122-2 interfaces.
the SR2122-2.
configuration of the SR2122-2.
Configuring System Parameters
109