Configuring Passwords; Configuring Administrator Contact Information - HP StorageWorks SR2122 User Manual

Configuring Passwords

Configuring passwords consists of setting the monitor-mode and
administrator-mode passwords for access to the 10/100 Ethernet management
interface (used for the CLI via Telnet and the web-based GUI via HTTP). You can
enable these passwords to restrict access to the EIA/TIA-232 console interface. To
configure passwords:
Note:
In a cluster environment, passwords are cluster-wide configuration elements and
apply to all storage routers in a cluster. All password management functions are
handled by a single storage router. If you issue try to set the Administrator or
Monitor mode passwords from a storage router that is not performing password
management functions, the CLI displays an informational message with the name
of the storage router that is currently handling those functions.
To configure passwords
1. enable — Enter Administrator mode.
2. monitor password janu$01 — Set the monitor password (for user
3. admin password elect@50 — Set the administrator password (for
4. restrict console — (Optional) Enable the Monitor-mode and

Configuring Administrator Contact Information

Configuring administrator contact information consists of tasks for specifying the
name, e-mail address, phone number, and pager number of the system
administrator for the storage router. To configure administrator contact
information:
IP Storage Router SR2122-2 User Guide
The factory default password for both Monitor and Administrator modes is hp.
who only monitors storage router operation).
system administrators, allowing configuration changes).
Administrator-mode passwords to be required when accessing the SR2122-2
via a console connected to the EIA/TIA-232 console interface.
Configuring System Parameters
105