Using Join - Cisco 7970 Series Phone Manual

Using Join

(SCCP phones only)
Join allows you to combine two or more existing calls to create a conference in which you are a
participant.
If you want to...
Create a conference by joining
together existing calls that are
on a single phone line
Create a conference by joining
together existing calls that are
on multiple phone lines
Join together two existing
conferences
See a list of participants or
remove participants
Cisco Unified IP Phone 7970 Series Phone Guide for Cisco Unified Communications Manager 6.1(3)
Then...
1. From an active call, highlight another call that you want to
include in the conference and press Select.
Selected calls display this icon
2. Repeat this step for each call that you want to add.
3. Press Join. (You may need to press the more softkey to see Join.)
1. From an active call, press Join. (You may need to press the more
softkey to see Join.)
2. Press the green flashing line button
want to include in the conference.
One of the following occurs:
• The calls are joined.
• A window opens on your phone screen prompting you to select
the call(s) that you want to join. Highlight the call(s) and press
Select, then press Join to complete the action.
If your phone does not support Join for calls on multiple lines,
Note
transfer the calls to a single line before using Join.
Use the Join or DirTrfr softkeys.
Check with your system administrator to see if this feature is
available to you.
See Viewing or Removing Conference Participants, page
Basic Call Handling
.
for the call(s) that you
41.
-39