Ending A Call - Cisco 7970 Series Phone Manual

If you want to...
Answer a priority call
(SCCP phones only)
Answer a call on your
cellular phone or other
remote destination
Tip
If parties on a call hear a beep tone, the call might be monitored or recorded. Ask your system
administrator for more information.

Ending a Call

To end a call, simply hang up. Here are some more details.
If you want to...
Hang up while using the handset
Hang up while using a headset
Hang up while using the speakerphone Press
Hang up one call, but preserve another
call on the same line
-30
Then...
Hang up the current call and press
Answer.
Set up Mobile Connect and answer your
phone.
When you enable Mobile Connect:
Your desktop and remote destinations
receive calls simultaneously.
When you answer the call on your
desktop phone, the remote destinations
stop ringing, are disconnected, and
display a missed call message.
When you answer the call on one remote
destination, the other remote
destinations stop ringing, are
disconnected, and a missed call message
is shown on the other remote
destinations.
Then...
Return the handset to its cradle. Or press EndCall.
Press
Press EndCall. If necessary, remove the call from hold first.
For more information, see...
Prioritizing Critical Calls,
page 52
Managing Business Calls
Using a Single Phone Number,
page 54
. Or, to keep headset mode active, press EndCall.
or EndCall.
OL-16993-01