Table of Contents
Advertisement
CHANGING THE PRESSER FOOT
CAUTION
• Always touch
keys and buttons before changing the presser
foot. If
is not touched and the "Start/
Stop" button or another button is pressed, the
machine will start and may cause injury.
• Always use the correct presser foot for the
selected stitch pattern. If the wrong presser
foot is used, the needle may strike the presser
foot and break, and may cause injury.
• Make sure that the presser foot is installed in
the correct direction, otherwise the needle
may strike the presser foot, breaking the
needle and causing injuries.
IMPORTANT
• Use presser feet made for this machine.
Removing the Presser Foot
a
Press the "Needle Position" button to raise
the needle.
b
Touch
to lock all keys and buttons.
*
If the message [OK to automatically lower the
presser foot?] appears on the LCD screen, touch
to continue.
c
Raise the presser foot lever.
on the screen to lock all
CHANGING THE PRESSER FOOT
d
Press the black button on the presser foot
holder and remove the presser foot.
a
b
a Black button
b Presser foot holder
Attaching the Presser Foot
a
Place the new presser foot under the
holder, aligning the foot pin with the notch
in the holder. Lower the presser foot lever
so that the presser foot pin snaps into the
notch in the holder.
a Notch
b Pin
b
Raise the presser foot lever to check that
the presser foot is securely attached.
c
Touch
to unlock all keys and buttons.
2
57
Advertisement
Table of Contents
