Brother 882-W33 Operation Manual page 69

d
When the end of stitching has been
reached, press he "Reverse Stitch" button
or the "Reinforcement Stitch" button.
a Reverse stitches (or reinforcement stitches)
 The machine will sew reverse stitches (or
reinforcement stitches) and stop.
Memo
• To turn off the automatic reinforcement
stitching function, touch
appears as .
■ The Operation Performed when the
"Reverse Stitch" or "Reinforcement
Stitch" is Pressed
The operation performed when the button is pressed
differs depending on the selected stitch pattern.
Refer to the following table for details on the
operation that is performed when the button is
pressed.
Automatic reverse/reinforcement stitching function is not
active.
again, so it
(Stitch patterns
has a dot mark
" "at the top of
the key)
Other than
straight/zigzag
stitch patterns
SEWING
"Reverse Stitch" "Reinforcement
button Stitch" button
Machine sews Machine sews 3 – 5
reverse stitches reinforcement
while holding the stitches while
"Reverse Stitch" holding the
button. "Reinforcement
Stitch" button.
Machine sews Machine sews 3 – 5
reverse stitches reinforcement
while holding the stitches while
"Reverse Stitch" holding the
button.* "Reinforcement
Stitch" button.
Machine sews 3 – 5 Machine sews 3 – 5
reinforcement reinforcement
stitches while stitches while
holding the "Reverse holding the
Stitch" button. "Reinforcement
Stitch" button.
Machine sews 3 – 5 Machine sews 3 – 5
reinforcement reinforcement
stitches while stitches while
holding the "Reverse holding the
Stitch" button. "Reinforcement
Stitch" button.
At the end of sewing,
when the
"Reinforcement
Stitch" button is
pressed, the
"Reinforcement
Stitch" button lights
up, machine
completes the stitch
pattern, stops
sewing, then sews
reinforcement
stitches.
2
67