Installing memory modules
There are two memory slots on the system board. To remove or install memory modules:
1.
Remove the access panel.
For instructions, see
2.
Remove the electromagnetic interference (EMI) shield from the system board.
If your computer model is a ProOne 600, lift the EMI shield off the system board.
●
If your computer model is a ProOne 400, use a flat blade or Torx screwdriver to remove the screws
●
that secure the EMI shield and lift the shield off the computer.
3.
To locate the memory modules on the system board, see
32
Chapter 3 Hardware repair and upgrade
Removing the computer access panel on page
28.
Locating internal components on page
30.