Figure 5-31 Removing The Floppy Disk Drive Bay's Rear Cover - HP Visualize B1000 Owner's Manual

Changing Your Computer Hardware Configuration
Removable Media Devices
2. Remove the floppy disk drive bay's rear cover by unscrewing the T-15
Figure 5-31 Removing the Floppy Disk Drive Bay's Rear Cover
Power Cable
Rear Cover
134
Torx/slotted screw as shown in Figure 5-31. Note that the floppy disk
drive bay's rear cover is located on the rear of the removable media
chassis inside the system unit. Push the cover handle away from the
rear of the removable media chassis approximately one inch. Next
pull the cover handle toward you. Remove the floppy data and power
cables from their connectors.
Rear Cover Handle
Data Cable
T-15
Torx/Slotted
Screw
Chapter 5