Setting The Monitor Type Using Sam - HP Visualize B1000 Owner's Manual

Changing Your Computer Hardware Configuration
Changing Your Monitor Type

Setting the Monitor Type Using SAM

This method for setting the monitor type requires the use of the HP CDE
interface. This means that you should have already set your monitor
type using one of the methods defined in a previous section, or you have
an Instant Ignition system that boots up using the HP CDE interface.
To use the System Administration Manager (SAM) to set the monitor
type, follow the steps in this procedure:
1. Log in as root.
2. Move the mouse pointer to the Application Manager control for tools
and click the left mouse button. Alternatively you can execute sam at
a terminal window command prompt and skip to step 5.
3. Double click on the System_Admin icon in the Application
Manager window.
160 Chapter 5