Figure 5-33 Removing The Floppy Disk Drive - HP Visualize B1000 Owner's Manual

Changing Your Computer Hardware Configuration
Removable Media Devices
4. Remove both floppy disk bracket screws (T-15 Torx/slotted screws)
Figure 5-33 Removing the Floppy Disk Drive
Floppy Disk
Drive
136
and pull the floppy disk drive out of the chassis assembly as shown in
Figure 5-33. Next remove the four floppy disk drive mounting screws
(T-10 Torx/slotted screws) as shown in Figure 5-33 and remove the
floppy disk drive from the bracket. You are now ready to attach the
floppy disk drive blank to the floppy disk drive bracket.
Floppy Disk Bracket
Floppy Disk
Mounting Screw
(there are four
of them)
Bracket
Screw
Chapter 5