Figure 5-43 Replacing The Hard Disk Drive Bracket - HP Visualize B1000 Owner's Manual

4. Replace the four mounting screws on the hard disk drive bracket to
Figure 5-43 Replacing the Hard Disk Drive Bracket
Chapter 5
store them for future use. Slide the mounting bracket into its hard
drive slot, and push inward on the release lever until the front of the
hard dive bracket is flush with the system unit and the release lever
snaps closed. See Figure 5-43. The front panel should now be replaced
as explained in the section "Closing the System Unit Front Panel" in
this chapter.
Storage Locations for the
T-15 Should Screws
Changing Your Computer Hardware Configuration
Hard Disk Drives
Hard Disk
Drive Bracket
Plastic Release
Hook
Release Lever
147