Table of Contents
Advertisement
Next steps
1. Install the
memory
module.
2. Install the
wireless
card.
3. Install the
solid-state
4. Install the
rear
cover.
5. Install the battery.
6. Install the
base
cover.
7. Follow the procedure in
Removing the system board (NVIDIA GeForce RTX 3050 Ti
graphics card)
Prerequisites
1. Follow the procedure in
CAUTION:
Before removing the system board, give sufficient time for the heat sink to cool down to avoid
injury.
NOTE:
Replacing the system board removes any changes that you have made to the BIOS using the BIOS setup
program. Make the appropriate changes again after you replace the system board.
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
rear
cover.
5. Remove the
solid-state
6. Remove the
wireless
card.
7. Remove the
memory
module.
NOTE:
This procedure only applies to computers shipped with a NVIDIA GeForce 3050 Ti graphics card.
About this task
The following image indicates the connectors on your system-board assembly.
1. Display cable
2. DDS (Dynamic Display Switch) cable
3. Speaker cable
4. Right-fan cable
5. Power-adapter port cable
drive.
After working inside your
Before working inside your
drive.
computer.
computer.
Removing and installing components
43
Advertisement
Table of Contents
