Wireless Card; Removing The Wireless Card - Dell G16 7620 Service Manual

Steps
1. Align the notch on the M.2 2280 solid-state drive with the tab on the M.2 card slot.
2. Slide the M.2 2280 solid-state drive into the M.2 card slot.
3. Place the thermal shield on the M.2 2280 solid-state drive.
4. Align the screw holes on the thermal shield with the screw holes on the M.2 2280 solid-state drive and system board.
5. Replace the two screws (M2x4) that secure the thermal shield to the M.2 2280 solid-state drive and the system board.
Next steps
1. Install the base cover.
2. Follow the procedure in

Wireless card

Removing the wireless card

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
About this task
The following image indicates the location of the wireless card and provides a visual representation of the removal procedure.
20 Removing and installing components
After working inside your
Before working inside your
computer.
computer.