Table of Contents
Advertisement
Table 12. System setup options—Power Management menu (continued)
Power Management
Lid Switch
Table 13. System setup options—Wireless menu
Wireless
Wireless Switch
WLAN
Bluetooth
Wireless Device Enable
WLAN
Bluetooth
Table 14. System setup options—POST Behavior menu
POST Behavior
Numlock Enable
Enable Adapter Warnings
Extend BIOS POST Time
Fastboot
Fn Lock Options
Lock Mode
Pull Screen Logo
Warnings and Errors
68
System setup
Enables the computer to power up from the off state whenever the lid is
opened.
Default: ON.
Determines which wireless devices can be controlled by the Wireless Switch.
For Windows 8 systems, this is controlled by an operating system drive directly.
As a result, the setting does not affect the Wireless Switch behavior.
NOTE:
When both WLAN and WiGig are present, enable/disable controls
are tied together. Thus, they cannot be enabled or disabled independently.
Default: ON.
Default: ON.
Enable or disable internal WLAN/Bluetooth devices.
Default: ON.
Default: ON.
Enables or disables Numlock when the computer boots.
Default: ON.
Enables the computer to display adapter warning messages during boot.
Default: ON.
Configures the BIOS POST (Power-On Self-Test) load time.
Default: 0 seconds.
Configures the speed of the UEFI boot process.
Default: Thorough. Performs complete hardware and configuration initialization
during boot.
Enables or disables the Fn lock mode.
Default: ON.
Default: Lock Mode Secondary. Lock Mode Secondary = If this option is
selected, the F1-F12 keys scan the code for their secondary functions.
Enabled or disabled the computer to display full screen logo if the image match
screen resolution.
Default: OFF.
Selects an action on encountering a warning or error during boot.
Default: Prompt on Warnings and Errors. Stop, prompt and wait for user input
when warnings or errors are detected.
NOTE:
Errors deemed critical to the operation of the computer hardware
will always halt the computer.
Advertisement
Table of Contents
