Set Supervisor/User Password - QUANTA CPV4-M Manual

Set Supervisor/User Password

The "Set Supervisor/User Password" utility sets the password.
mainboard is shipped with the password disabled.
change the password, you must first enter the current password, then at
the prompt enter your new password. The password is case sensitive.
You can use up to eight alphanumeric characters. Selecting "Set Su-
pervisor Password" or "Set User Password" from the main menu
displays the following screen:
Enter Password:
Press <Enter> after entering the password. You will be prompted to
confirm the password:
Confirm Password:
Confirm the new password by retyping it and pressing <Enter> again.
To disable the password, press the <Enter> key instead of entering a
new password when the "Enter Password" dialog box appears. A mes-
sage appears confirming that the password has been disabled:
If you have set supervisor and user passwords, only the supervisor
password allows you to enter the BIOS Setup Program.
PASSWORD DISABLED !!!
Press any key to continue . . .
63
The
If you want to