Connecting Power And Suspend Leds - QUANTA CPV4-M Manual

5. Locate the PANEL switches and indicators connector on the
motherboard. Begin connecting the case switches and indica-
tors to the appropriate pins on the PANEL connector.
Connect your computer case's front panel LEDs and buttons to the
PANEL connector. Use the illustration and tables below to make the
correct connections.
Infrared Connector
PIN Description
2 N.C.
4 IR TX
6 Ground
8 IR RX
10 N.C.
12 +5V
Note: If you short pins 1-3 on PANEL, the onboard buzzer is enabled
and the speaker is disabled.

Connecting Power and Suspend LEDs

Item LED
Power LED
1 Suspend LED
(Note 1)
Power/Suspend LED
2
(Note 1)
Power LED
3 Suspend LED
(Note 1)
Power/Suspend LED
4
(Note 1)
Power/Suspend LED
5
(Note 2)
Note: 1 Item1~4: Power LED State is "Always High"
Suspend LED State is "Pulse"
Infrared
Connector
2
1
+ + +
Power and
Reset
Speaker
Suspend
SW
LEDs
(see below)
# of pin Color
3-pin Mono.
3-pin Mono.
3-pin Dual Color 15, 17, 19
3-pin Mono.
3-pin Mono.
3-pin Mono.
3-pin Mono.
22
Power
SW
26
25
+ +
HDD
LED
Connect to pin
13, 15, 17
19, 21
15, 17
19, 21
15, 17, 19
19, 21