Frequency Control - QUANTA CPV4-M Manual

Frequency Control

This menu enables you to set operating characteristics of the CPU such
as the internal core speed. Selecting Frequency Control from the main
menu displays the following screen:
CMOS Setup Utility – Copyright (C) 1984 – 2000 Award Software
Auto Detect DIMM/PCI Clk
Spread Spectrum
CPU Ratio
CPU Frequency
↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓ → → → → ← ← ← ← : Move
Enter : Select
F5:Previous Values
Auto Detect DIMM/PCI Clk
When set to "Enabled," the system will automatically turn off the PCI
and DIMM clock when not in use to reduce electromagnetic interfer-
ence.
Spread Spectrum
When set to "Enabled," the system clock frequency will automatically
modulated to help reduce electromagnetic interference. Default is
"Enabled".
CPU Ratio
Enables you to set the CPU core to bus clock ratio (CPU Ratio). Op-
tions are Auto (default), and from "X 2" to "X 8" in increments of 0.5.
CPU Frequency
Enables you to set the CPU Bus clock (CPU Frequency) manually.
Options are:
!"Auto (default)
!"66 MHz
!"100 MHz
!"133 MHz
Frequency Control
Enabled
Enabled
Auto
Auto
+/-/PU/PD:Value: F10: Save ESC: Exit F1:General Help
F6:Fail-Safe Defaults F7:Optimized Defaults
61
Item Help
Menu Level