Advanced Bios Features Setup - QUANTA CPV4-M Manual

Base Memory
This field displays the amount of conventional memory detected by
the system during bootup. You do not need to make changes to this
field. This is a display only field.
Extended Memory
This field displays the amount of extended memory detected by the
system during boot-up. You do not need to make changes to this
field. This is a display only field.
Total Memory
This field displays the total amount of memory (Base and Extended)
detected by the system during boot-up. You do not need to make
changes to this field. This is a display only field.

Advanced BIOS Features Setup

Selecting "Advanced BIOS Features" on the main program screen dis-
plays this menu:
CMOS Setup Utility – Copyright (C) 1984 – 2000 Award Software
Virus Warning
CPU Internal Cache
External Cache
CPU L2 Cache ECC Checking
Processor Number Feature
Quick Power On Self Test
First Boot Device
Second Boot Device
Third Boot Device
Boot Other Device
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up NumLock Status
Gate A20 Option
Typematic Rate Setting
x Typematic Rate (Chars/Sec)
x Typematic Delay (Msec)
Security Option
OS Select For DRAM > 64MB
↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓ → → → → ← ← ← ← : Move
Enter : Select
F5:Previous Values
Advanced BIOS Features
Disabled
Enabled
Enabled
Enabled
Disabled
Disabled
Floppy
CDROM
HDD0
Disabled
Disabled
Enabled
On
Fast
Disabled
6
250
Setup
Non-OS2
+/-/PU/PD:Value: F10: Save ESC: Exit F1:General Help
F6:Fail-Safe Defaults
40
Item Help
Menu Level
Allows you to choose
the VIRUS warning
feature for IDE Hard
Disk boot sector
protection. If this
function is enabled
and someone attempts
to write data into this
area, BIOS will show a
warning message on
screen and alarm beep
F7:Optimized Defaults