Table of Contents
Advertisement
Installation Procedure
1. On the motherboard, identify the CPU Socket-370 and the
cooling fan power-supply connector FAN1.
Socket 370
Pin 1 corner
2. Identify the pin-1 corner of the Socket-370. The pin-1 corner is
on the same side as the locking lever, as shown in the illustra-
tion below.
3. Identify the pin-1 corner of the processor (the pin-1 corner on
the processor has a beveled edge).
Upright
locking lever
4. Pull the locking lever of the Socket-370 away from the socket
to unlatch it, and then swing the lever into the upright position.
Fan1
PPGA Celeron/FC-PGA Pentium III
(without heatsink and cooling fan)
Pin-1
12
Advertisement
Table of Contents
