Jp6: Clear Password Jumper - QUANTA CPV4-M Manual

Function Jumper Cap
Clear CMOS Short pins 1-2
Normal operation Short pins 2-3
Note: The default setting is shaded gray.

JP6: Clear Password Jumper

Use this 3-pin jumper to clear the password stored in the CMOS mem-
ory. The setup utility can be protected by a password. This jumper
allows you to clear the password protection from the setup utility, in
case you forgot the initial password. To clear the CMOS password pro-
tection, first shut down the motherboard. Adjust JP6 to the pins 1-2
setting and power on the motherboard. Press Key F1 to enter the setup
utility and reset your password. Before saving the changes of setup
utility you modify, return the jumper to the pins 2-3 setting.
Function Jumper Cap
Clear Password Short pins 1-2
Normal operation Short pins 2-3
Note: The default setting is shaded gray.
JP7,JP8,JP9: Intel / VIA Cyrix III processor selection
Use these 3-pin jumpers to select which brand processor is installed.
Function JP7
Select Intel Processor Open pins 1-2 Short pins 1-2 Short pins 1-2
Select VIA Cyrix III Short pins 1-2 Open pins 1-2 Open pins 1-2
Processor
Reserved The others
JP5
JP6
JP8 JP9
18
1
2
3
1
2
3
1 2
JP8
JP7
JP9