HP Vectra VL600 User Manual page 56

3 Replacing and Upgrading PC Components
Replacing the Floppy Drive
3 Press the two latches inward and slide out the floppy drive tray.
4 Loosen the tray's 2 side screws and remove the old floppy drive.
pin side
5 Insert the new floppy drive (pin side first) then replace the two side
screws.
6 Slide the floppy drive tray back into the PC.
7 Attach the data and power connectors.
8 Replace the cover (described in this chapter).
56