Connecting To A Network (Some Models Only) - HP Vectra VL600 User Manual

Connecting to a Network (Some Models Only)

Connect the network cable to the LAN connector.
Let your Network Administrator know you
are connecting your PC to the network.
10/100BT LAN
Connector
If you decide to install a non-HP network card, installation and
configuration information may be provided on HP's Support web site
(most common cards are documented). Go to the LAN Card Ready
section at www.hp.com/go/vectrasupport.
1 Setting Up and Using Your PC
Connecting to a Network (Some Models Only)
10/100BT LAN
Connector
17