Connecting An External Scsi Accessory (Some Models Only) - HP Vectra VL600 User Manual

Connecting an External SCSI Accessory
(Some Models Only)
Your PC may be equipped with an Ultra2 LVD/SE 16-bit SCSI connector
for external SCSI devices.
An external SCSI device is connected as follows:
1 Set an unused SCSI address to the external device.
Refer to the manual provided with the SCSI accessory for
instructions on selecting a SCSI address.
2 Make sure the SCSI device is terminated correctly (refer to the
manual provided with the SCSI accessory).
The total length of the
external SCSI cables
should not exceed 3 meters
(approximately 10 feet).
Desktop
1 Setting Up and Using Your PC

Connecting an External SCSI Accessory (Some Models Only)

Make sure the SCSI
accessory is terminated
15