HP Vectra VL600 User Manual page 5

Corporate pc
Hide thumbs Also See for Vectra VL600:
Table of Contents

Advertisement

Important Safety Information
WARNING
For your safety, never remove the PC's cover without first removing
the power cord and any connection to a telecommunication network.
If a power protection device is fitted to your PC, you must remove the
power cord then wait for a complete shutdown of your system before
removing the cover. Remove the power protection device cables
before any servicing operation. Always replace the cover before
switching the PC on again.
There is a danger of explosion if the battery is incorrectly installed. For
your safety, never attempt to recharge, disassemble, or burn the old
battery. Replace only with the same or equivalent type recommended
by the manufacturer. The battery in this PC is a lithium battery that
does not contain heavy metals. Nevertheless, in order to protect the
environment, do not dispose of batteries in household waste. Please
return used batteries to the shop from which you bought them, to the
dealer from whom you purchased your PC, or to HP so they can either
be recycled or disposed of in a sound way. Returned used batteries will
be accepted free of charge.
If you have a modem:
Do not attempt to connect this product to the phone line during a
lightning storm. Never install telephone jacks in wet locations unless
the telephone line has been disconnected at the network interface.
Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected at the network interface. Use
caution when installing or modifying telephone lines. Avoid using a
telephone (other than a cordless type) during an lightning storm. There
may be a risk from lightning.
Do not use the telephone to report a gas leak in the vicinity of the leak.
Never touch or remove the communications board without first
removing the connection to the telephone network.
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents