HP Vectra VL600 User Manual page 53

3 Press the two latches inward and slide out the drive tray.
4 Loosen the tray's four screws (two on each side) and remove the old
CD-ROM drive.
5 Align the new CD-ROM drive in the tray (with the correct
orientation) and replace the screws.
6 Slide the drive tray back into the PC.
7 Attach the data and power connectors.
8 Replace the cover (described in this chapter).
3 Replacing and Upgrading PC Components
Replacing the CD-ROM, DVD-ROM or CD-RW Drive
53