Troubleshooting Orientation Table - HP Vectra VEi7 Supplementary Manual

Troubleshooting Orientation Table

Symptom Problem
PC does not start. No power.
PC's power indicator No display.
light works but monitor
remains blank.
The Display resolution Wrong resolution
is wrong. settings.
An error message/code Power-On-Self-Test
appears when the PC is has detected an
switched on. error.
You cannot turn off the The PC is frozen in
PC. power saving mode.
Problem
The PC's clock is not keeping time correctly
You have forgotten your password.
The Wake On LAN feature does not work.
There is an IRQ conflict when you install a new
accessory board.
The PC has an audio problem.
The PC has a software problem.
Recovering hard disk contents.
Further problems with floppy disk, hard disk,
DVD and CD-ROM drives.
1 Troubleshooting Your PC
Troubleshooting Orientation Table
Cause
Beep code error.
Memory error.
Keyboard or mouse error.
Floppy drive error.
Hard disk or CD-ROM error.
CMOS error.
Serial or parallel port error.
Other configuration problems.
Solution
Refer to page 14.
Refer to page 16.
Refer to page 16.
Refer to page 15.
Refer to page 17.
Refer to page 18.
Refer to page 19.
Refer to page 20.
Refer to page 21.
Refer to page 22.
Refer to page 23.
Refer to page 24.
Solution
Refer to page 21.
Refer to page 25.
Refer to page 26.
Refer to page 27.
Refer to page 28.
Refer to page 29.
Refer to page 31.
Refer to page 35.
13