Pci Slot Numbers Used In The Pc's Setup Program; Installing An Accessory Board - HP Vectra VEi7 Supplementary Manual

2 How to Install and Upgrade Accessories In Your PC
Installing Accessory Boards

PCI Slot Numbers Used in the PC's Setup Program

Your PC uses logical slot numbers in the Setup program. You only need
to know these PCI slot numbers if you want to change the PCI slot
configuration in the Setup program. The logical slot numbers are
printed on the PC's motherboard.

Installing an Accessory Board

NOTE
Only use XT format ISA accessory boards (width less than 10.4 cm or
4.1 inches).
The length of boards you install must not exceed 17.6 cm or 6.9 inches).
1 Remove the computer's cover (described in this chapter).
2 Undo the screw from the slot cover and lift the slot cover out.
58