Table of Contents
Advertisement
FLUEING
Flue Kits and Components (cont.)
Coaxial vertical flue cowl
RDV991
Aluminium
flue
terminal
required
for
all
vertical flue installations—
part of all vertical flue kits.
Ø268 mm
Coaxial 45° flue elbows (two bends in a kit)
RDV945G (unpainted)
Offsets obstructions. Elbow swivels 360° at base. Angle not adjustable. Once
joined effective length reduces 35 mm to approx. 73 mm.
Inner: Aluminium Ø100 mm
Coaxial 90° flue elbow unpainted, and painted
RDV990G (unpainted)
Used to facilitate between vertical and horizontal flueing. Elbow swivels at base.
Angle not adjustable. Once joined effective length reduces 35 mm to approx.130
mm
Inner: Aluminium Ø100 mm
45° black plate
RDVCP45
Black 45° plate to
cover/tidy hole where
flue pipe penetrates,
used
in
offset
installations.
Rinnai
DV
flue
75-360 mm
Used for extended straight lengths of flue. Available in two
coaxial
lengths—extending to 175 mm or 360 mm. CANNOT be cut to
size. Painted variants are powder coated black.
Inner: Aluminium Ø100 mm
RDV945B (painted, powder coated black)
Outer: Galv. steel Ø170 mm
RDV990B (painted, powder coated black)
Outer: Galv. steel Ø170 mm
pipe
extensions
unpainted,
RDV911 (unpainted)
Outer: Galv. steel Ø170 mm
Cover plate black
RDVCP90
Galaxy black ceiling/
wall plate to cover/
tidy hole where flue
pipe penetrates.
28
and
painted
RDV911GL (painted)
108
108
165
165
SS850 Freestanding IM
Advertisement
Table of Contents
