Table of Contents
Advertisement
CABINET INSTALLATION CONT.
Fit the base cover panel
Ensure the lower front edge of the panel is hooked
under the front edge of the base mounting panel
as shown below. The front faces MUST be flush.
Fix the panels in place using two screws.
Rinnai
Power supply
entry
368 mm
Fit side panel covers
Fit tabs into slots. Slide panels forward so the leading
edge is behind the side panel. Fix in place, one screw
per side.
Fit back panel
Fit tabs into slots. Fix in place with two screws.
Flue centre
17
INSTALLATION
Gas supply entry
SS850 Freestanding IM
Fire
footprint
Advertisement
Table of Contents
