Setting Mode; Selecting Setting Mode - Omron K3NX Operation Manual

Setting Mode

3-2

Setting Mode

3-2-1 Selecting Setting Mode

AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
• The K3NX in RUN mode will go into setting mode if the Mode Key is pressed for
1 s minimum.
• The K3NX in setting mode will go into RUN mode if the Escape Key is pressed.
Press the Mode and Shift Keys
while turning the K3NX on.
Maintenance mode
1 second
• The menu in each mode changes whenever the Mode Key is pressed.
• If the Mode Key is pressed for more than one second while a menu is dis-
played, a parameter will be displayed.
• The parameter changes whenever the Mode Key is pressed.
• If the Shift Key is pressed while a parameter is displayed, the parameter will be
ready to change.
• Press the Up Key to change parameters.
• The digit of a set value is selected with the Shift Key and changed with the Up
Key.
• The PROG indicator is lit while a menu or parameter is displayed.
• The PROG indicator flashes during a set value change.
Note If the input range is changed, all the other parameters will be set to default val-
ues. Therefore, set the input range first.
Power On
Press the Escape and Up
Keys for 1 second.
RUN mode
RUN mode
Setting mode
Section 3-2
Protect mode
21