Picking Up A Redirected Call On Your Conference Station - Cisco 7937G Manual

Picking Up a Redirected Call on Your Conference Station

Call PickUp allows you to answer a call that is ringing on a coworker's conference station by
redirecting the call to your conference station. You might use Call PickUp if you share call-handling
with coworkers.
If you want to...
Answer a call that is ringing on
another extension within your call
pickup group
Answer a call that is ringing on
another extension outside of your
group
Answer a call that is ringing on
another extension in your group or
in an associated group
Tips
• Pressing PickUp and GPickUp connects you to the call that has been ringing for the longest time.
• Pressing OPickUp connects you to the call in the pickup group with the highest priority. Your
system administrator sets the priority of pickup groups.
24
Then...
1. Do one of the following:
If the PickUp softkey is available, press it.
–
If the PickUp softkey is not available, go off-hook to
–
display it, and then press PickUp.
If the conference station supports auto-pickup, you are
now connected to the call.
2. If the call rings, press Answer to connect to the call.
1. Do one of the following:
If the GPickUp softkey is available, press it.
–
If the GPickUp softkey is not available, go off-hook
–
to display it, and then press GPickUp.
2. Enter the group pickup code.
If the conference station supports auto-pickup, you are
now connected to the call.
3. If the call rings, press Answer to connect to the call.
1. Do one of the following:
If the OPickUp softkey is available, press it.
–
If the OPickUp softkey is not available, go off-hook
–
to display it, and then press OPickUp.
If the conference station supports auto-pickup, you are
now connected to the call.
2. If the call rings, press Answer to connect to the call.
OL-11559-02