Using Cisco Extension Mobility; Using Autoanswer - Cisco 7937G Manual

Using Cisco Extension Mobility

Cisco Extension Mobility (EM) allows you to temporarily configure a conference station as your own.
Once you log in to EM, the conference station adopts your user profile, including the conference
station line, features, established services, and web-based settings. Your system administrator must
configure EM for you.
If you want to... Then...
Log on to EM 1. Choose
2. Enter your userID and PIN (provided by your system administrator).
3. If prompted, select a device profile.
Log off of EM 1. Choose
2. When prompted to log out, press Yes.
Tips
• EM automatically logs you out after a certain amount of time. This time limit is established by
your system administrator.
• Changes that you make to your EM profile (from your User Options web pages) take effect the
next time that you log on to EM on a conference station.
• Settings that are controlled only on the conference station are not maintained in your EM profile.

Using AutoAnswer

When AutoAnswer is enabled, your conference station answers incoming calls automatically after a
few rings. Your system administrator configures AutoAnswer to use the conference station. You might
use AutoAnswer if you receive a high volume of incoming calls.
28
> Services > EM Service (name can vary).
> Services > EM Service (name can vary).
OL-11559-02