Manage Conference Call Layout - Cisco TelePresence MX200 G2 User Manual

27 Conference Calls with Multiple Participants

Manage Conference Call Layout

To change the existing layout on your video screen, tap
Layout.
The new layout will now be put in effect.
Tap the new preferred layout.
About Layout Options
You may alter the screen layout
when you are in a call. The Touch
pad will show the options available.
The actual options may differ from
what is shown here, but the Touch
device will always show you what is
available.
The WYSIWYG (what you see is what
you get) principle applies even here.
Including a Selfview
Selfview (what the others see from
your video system) may be added
to any layout in the usual way. To
invoke the selfview See "Manage
Selfview" on page 49.
If needed, you may also move the
selfview to a different location.
See "Move the Selfview PiP" on
page 51.
D1507606 User Guide
Cisco TelePresence SX10, SX20, MX200 G2,
MX300 G2, MX700, MX800, SX80
Produced: December 2014 for TC 7..3
All contents © 2010–2014
Cisco Systems, Inc. All rights reserved.