Connecting Your Conference Station; Connecting The Conference Station To The Network - Cisco 7937G Manual

Connecting Your Conference Station

Your system administrator will likely connect your new Cisco Unified IP Conference Station 7937G to
the corporate IP telephony network. If that is not the case, refer to the following graphics and tables
to connect the conference station.

Connecting the Conference Station to the Network

The following graphic and table describe how to connect the conference station to the network.
Connecting multiple conference stations is not a supported configuration and will not work.
Note
1
Connection of end of network cable (without ferrite bead) to RJ-45 port on bottom of
1
conference station
2 Network cable (25-foot)
3 Connection of end of network cable (with ferrite bead) to LAN port
4
2
3
OL-11559-02