Starting And Joining A Standard Conference - Cisco 7937G Manual

Meet-Me Conference Calls
You can create a Meet-Me conference by calling the Meet-Me conference station number at a specified
time. For additional instructions, see

Starting and Joining a Standard Conference

A standard conference allows at least three participants to talk on a single call.
If you want to...
• Create a conference by
calling participants
• Add new participants
to an existing
conference
Participate in a conference Answer the conference station when it rings.
Create a conference by
barging a call
View a list of conference
participants
Get an updated list of
participants
See who started the
conference
Drop the last party added
to the conference
Remove any conference
participant
End your participation in a
conference
Tip
• Depending on how the conference station is configured, if you leave a conference after creating it,
the conference might end. To avoid this, transfer the conference before hanging up.
Cisco Unified IP Conference Station 7937G Phone Guide for Cisco Unified Communications Manager 6.0
Starting or Joining a Meet-Me Conference Call, page
Then...
1. From a connected call, press Confrn. (You may need to press the
more softkey to see Confrn.)
2. Enter the participant's conference station number.
3. Wait for the call to connect.
4. Press Confrn again to add the participant to your call.
5. Repeat steps 1 to 4 to add additional participants.
Highlight a call on a shared line and press cBarge. (You may need to
press the more softkey to see cBarge.) See
1. Highlight an active conference.
2. Press ConfList.
Participants are listed in the order in which they join the conference
with the most recent additions at the top.
While viewing the conference list, press Update.
While viewing the conference list, locate the person listed at the bottom
of the list with an asterisk (*) next to the name.
Press RmLstC.
You can remove participants only if you initiated the conference call.
1. Highlight the participant's name.
2. Press Remove.
You can remove participants only if you initiated the conference.
Hang up or press EndCall.
22.
Using a Shared Line, page 25.
21