Basic Call Handling; Placing A Call-Basic Options - Cisco 7937G Manual

Basic Call Handling

You can perform basic call-handling tasks using a range of features and services. Feature availability
can vary; see your system administrator for more information.
Placing a Call—Basic Options
Here are some easy ways to place a call on your conference station.
If you want to...
Place a call off-hook (with a
dial tone)
Place a call on-hook (without
a dial tone), or pre-dial a
number
Redial a number
Place a call while another call
is active
Dial from a call log
Tip
• If you make a mistake while dialing, press << to erase digits.
Cisco Unified IP Conference Station 7937G Phone Guide for Cisco Unified Communications Manager 6.0
Then...
Press to go off-hook, and then
enter a number.
Enter a number, and then go off-hook by
pressing Dial or
Press to dial the last number.
Or, press the Down Navigation button
(with the conference station idle),
highlight the desired phone number, and
then press Dial.
1. Press Hold.
2. Press New Call.
3. Enter a number.
1. Choose > Missed Calls,
Placed Calls, or Received Calls.
2. Select the desired listing from the
call log, and then press Dial.
For more information,
see...
Understanding Buttons
and Hardware, page 8.
Understanding Buttons
and Hardware, page 8.
.
Using Call Logs, page
Using Hold and Resume,
page
Using Call Logs, page
31.
17.
31.
15