Muting A Call; Placing A Conference Call; Ending A Conference Call - Cisco 7935 Quick Start Manual

Muting a call

• While on a call, press the Mute button.
The LEDs blink red and a Mute icon appears in the LCD screen display.
• To turn off Mute, press the Mute button again.
Conference Calls

Placing a conference call

Press the Phone button.
Step 1
Dial the number of the first party you want to add to the conference call.
Step 2
After the party answers, press the Conf softkey to obtain a new line.
Step 3
The other party is automatically placed on hold.
Dial the number of the next party you want to add to the conference call.
Step 4
When the party answers, press the Conf softkey again to add the party to the conference call.
Step 5
Repeat steps 3-5 to keep adding parties to a conference call.
You can also add parties to a conference call using the phone book.
Tip

Ending a conference call

• Press the Phone button
Meet Me
The IP Conference Station supports Meet Me conferences. A Meet Me conference allows other callers
to dial into the conference call. A Meet Me conference requires a special conference number that is
configured by the system administrator. Contact your system administrator to obtain a directory
number for a Meet Me conference.
21