Load Ledger, Legal, Or A3 Size Paper In Tray #1 - Brother MFC-J5330DW Basic User's Manual

Load Ledger, Legal, or A3
Size Paper in Tray #1
• If the [Check Paper] setting is set to
[On] and you pull the paper tray out of
the machine, a message appears on the
LCD asking if you want to change the
paper type and paper size. Change the
Paper Size and Paper Type settings if
needed, following the LCD instructions.
• Load only one size and type of paper in
the paper tray at a time.
• When you load a different paper size in
the tray, you must change the Paper
Size setting in the machine or the paper
size setting on your computer.
1
Pull the paper tray completely out of the
machine as shown by the arrow.
2
Remove the tray top cover (1).
3
Rest the tray on a flat surface.
Push the green slider to the left and
then extend the tray until it locks into
place.
4
Gently press and slide the paper width
guides (1) and then the paper length
guide (2) to fit the paper size.
Make sure the triangular mark (3) on the
paper width guide (1) and paper length
guide (2) line up with the marks for the
paper you are using.
1
3
2
1
3
12