Section 9. Accessory System - Kohler PRO 3.7 Owner's Manual

Accessory kits available for models listed below which includes custom kits consisting of legs, handles, wheels, lifting kits —
whatever you want, any way you want it.

Wheel Kit

Leg Kit

Lifting

Wheelbarrow Handle Kit

Cord Management Kit

Hand Truck Handle

Isolator Kit
9.1 Install Wheel Kit
Wheel Kit
Figure 3 Wheel Kit
Tilt unit so fuel tank cap is upward to ensure no fuel leakage.
A clamping device or an assistant to hold assembly while installing kit will make process easier.
Wheel kit includes 2 wheels and mounting hardware to be installed opposite of engine side. Wheel kit and leg kit are designed to be
installed together. 2 wheel kits can be combined for a 4 wheel configuration.
1. Place 4 screws into holes of frame.
2. Bring bracket of wheel under frame and align screws with bracket holes.
3. Thread nuts to screws. Torque to 221 in. lbs. (25 Nm).
9.2 Install Leg Kit
Tilt unit so fuel tank cap is upward to ensure no fuel leakage.
A clamping device or an assistant to hold assembly while installing
kit will make process easier.
Leg kit includes 2 legs and mounting hardware. Leg kit and
wheel kit are designed to be installed together. 2 leg kits can
be combined for a 4 legged configuration.
1. Place 4 screws into holes of frame.
2. Bring leg under frame and align screws with leg
holes.
3. Thread nuts to screws. Torque to 221 in. lbs. (25
Nm).
9.3 Install Lift Kit
A clamping device or an assistant to hold assembly while installing
kit will make process easier.
Lift kit includes lift bar and mounting hardware.
1. Align lift bar holes under holes of frame.
2. While holding in this position, install screws.
3. Thread nuts to screws. Torque to 221 in. lbs. (25
Nm).
TP-7213 7/21
Wheel Kit (Wheels and Legs)
Figure 4
Figure 5

Section 9. Accessory System

Wheel Kit (4 Wheels)
Leg Kit
Lift Kit
11