2.4.3
SUPPORT CHIPSET
Table 2-2 shows the chipsets used for the Deskpro 2000 systems with MMX technology.
Table 2–2. Support Chipsets
Function
North Bridge:
Memory Controller
Host/PCI Bridge
Host/AGP Bridge
South Bridge:
PCI/ISA Bridge
EIDE Controller
DMA Controller
Interrupt Controller
Timer/Counter
NMI Registers
Reset Control Reg.
USB I/F (2)
RTC/Configuration memory
I/O Controller:
Diskette I/F
Serial I/F
Parallel I/F
NOTE:
[1] 82443EX on 66-MHz slot 1 (2-DIMM) system.
82443BX on 100-MHz slot 1 (3-DIMM) system.
2.4.4
MASS STORAGE
All models include a 3.5 inch 1.44-MB diskette drive installed. A 5.2-GB EIDE hard drive is
also installed. All models include a PCI bus-mastering Enhanced IDE (EIDE) controller that
provides two EIDE interfaces supporting up to four IDE devices operating in Ultra ATA modes.
Master/slave drive selection is determined using the cable-select method, eliminating the need to
move jumpers when re-configuring drives.
2.4.5
SERIAL AND PARALLEL INTERFACES
This system includes two serial and one parallel port accessable at the rear of the unit chassis.
The serial and parallel ports are integrated into the I/O Controller component. The serial port is
RS-232-C/16550-compatible and operates at baud rates up to 115,200. The parallel interface is
Enhanced Parallel Port (EPP1.9) and Enhanced Capability Port (ECP) compatible and supports
bi-directional data transfers.
Table 2-2.
Support Chipsets
Compaq Deskpro EP Series of Personal Computers
First Edition–- April1998
Technical Reference Guide
Component Type
82443 [1]
"
"
82371
"
"
"
"
"
"
"
"
"
87309
"
"
"
2-9