Programming; E.4 Programming; E.4.1 Configuration; E.4.2 Control - Compaq Deskpro EP 6233 Technical Reference Manual

Hp deskpro ep 6233: reference guide
Hide thumbs Also See for Deskpro EP 6233:
Table of Contents

Advertisement

E.4

PROGRAMMING

Programming consists of configuration (using PCI protocol over the AGP bus) and
software/firmware control of the operation registers.

E.4.1 CONFIGURATION

The ATI RAGE IIC graphics card works off the AGP bus and is configured through the
controller's configuration space registers (listed in Table E-3) using PCI protocol. These registers
are configured by BIOS during POST to the default configuration.
Table E–3. ATI RAGE IIC PCI Configuration Space Registers
PCI Config.
Address
Function
00h
Vender ID/Device ID
04h
PCI Command
08h
Status
10h
Display Memory Base Address
For a discussion of accessing PCI configuration space registers refer to chapter 4. For a detailed
description of registers refer to applicable ATI Technologies Inc. documentation.

E.4.2 CONTROL

Table E-4 lists the standard VGA control registers of the ATI RAGE IIC controller. These
registers can be directly accessed by software written for standard VGA modes.
Table E–4. Standard VGA Mode I/O Mapping
I/O
Address
3B5.00..26h [1]
3BAh
3C1.00..14h [1]
3C2h
3C5h.00..04h [1]
--
NOTE:
[1] Index at base minus 1 (i.e., if base is 3B5h, index is at 3B4h).
Extended mode registers (display and configuration, GUI, multimedia, and PLL registers) may be
I/O or memory-mapped and are controlled through the supplied graphics driver. The graphics
driver is adaptable to all current ATI RAGE controllers.
Table E-3.
ATI RAGE IIC PCI Configuration Space Registers
Table E-4.
Standard VGA Mode I/O Mapping
Function
CRT Controller (mono)
VSYNC Control, Display Sts.
Attribute Controller
Misc. Control / Status
Sequencer
--
Original - March 1998
Technical Reference Guide
PCI Config.
Address
Function
14h
Relocateable I/O Base Address
30h
Expansion ROM Base Address
3Ch
Interrupt Line / Interrupt Pin
--
--
I/O
Address
Function
3C6h..3C9h
RAMDAC
3CAh
Read VSYNC Status
3CCh
Misc. Control, Read
3CF.00..08h
Graphics Controller
3D5.00..26h [1]
CRT Controller (color)
3DAh
VSYNC Control, Display Status (color)
Compaq Personal Computers
E-5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents