Processor Error Messages; Table A-4. Processor Error - Compaq Deskpro EP 6233 Technical Reference Manual

A.5 PROCESSOR ERROR MESSAGES (1xx-xx)
Table A–4. Processor Error Messages
Message Probable Cause
101-01 CPU test failed
101-02 32-bit CPU test failed
101-91..94 Multiplication test failed
102-01 FPU initial sts. word incorrect
102-02 FPU initial cntrl. Word incorrect
102-03 FPU tag word not all ones
102-04 FPU tag word not all zeros
102-05 FPU exchange command failed
102-06 FPU masked exception error
102-07 FPU unmasked exception error
102-08 FPU wrong mask status bit set
102-09 FPU unable to store real number
102-10 FPU real number calc test failed
102-11 FPU speed test failed
102-12 FPU pattern test failed
102-15 FPU is inoperative or not present
102-16 Weitek not responding
102-17 Weitek failed register trnsfr. Test
102-18 Weitek failed arithemetic ops test
102-19 Weitek failed data conv. Test
102-20 Weitek failed interrupt test
102-21 Weitek failed speed test
103-01 DMA page registers test failed
103-02 DMA byte controller test failed
103-03 DMA word controller test failed
104-01 Master int. cntlr. test fialed
104-02 Slave int. cntlr. test failed
104-03 Int. cntlr. SW RTC inoperative
105-01 Port 61 bit <6> not at zero
105-02 Port 61 bit <5> not at zero
105-03 Port 61 bit <3> not at zero
105-04 Port 61 bit <1> not at zero
105-05 Port 61 bit <0> not at zero
105-06 Port 61 bit <5> not at one
105-07 Port 61 bit <3> not at one
Table A-4.

Processor Error Messages

Message Probable Cause
105-08 Port 61 bit <1> not at one
105-09 Port 61 bit <0> not at one
105-10 Port 61 I/O test failed
105-11 Port 61 bit <7> not at zero
105-12 Port 61 bit <2> not at zero
105-13 No interrupt generated by failsafe timer
105-14 NMI not triggered by failsafe timer
106-01 Keyboard controller test failed
107-01 CMOS RAM test failed
108-02 CMOS interrupt test failed
108-03 CMOS not properly initialized (interrupt test)
109-01 CMOS clock load data test failed
109-02 CMOS clock rollover test failed
109-03 CMOS not properly initialized (clock test)
110-01 Programmable timer load data test failed
110-02 Programmable timer dynamic test failed
110-03 Program timer 2 load data test failed
111-01 Refresh detect test failed
112-01 Speed test Slow mode out of range
112-02 Speed test Mixed mode out of range
112-03 Speed test Fast mode out of range
112-04 Speed test unable to enter Slow mode
112-05 Speed test unable to enter Mixed mode
112-06 Speed test unable to enter Fast mode
112-07 Speed test system error
112-08 Unable to enter Auto mode in speed test
112-09 Unable to enter High mode in speed test
112-10 Speed test High mode out of range
112-11 Speed test Auto mode out of range
112-12 Speed test variable speed mode inoperative
113-01 Protected mode test failed
114-01 Speaker test failed
116-xx Way 0 read/write test failed
199-00 Installed devices test failed
-- --
Changed – March 1998
Technical Reference Guide
Compaq Personal Computers A-3